分类目录归档:常见问题

分享关于密封的常见问题及基本知识!

威尔顿气动隔膜泵膜片的密封件材料故障分析及维护保养!

威尔顿气动隔膜泵是一种以气压为动力,通过隔膜泵腔内的膜片来实现吸入和排出液体的泵。东晟密封件告诉您膜片是威尔顿气动隔膜泵的核心部件之一,它的质量和性能直接关系到泵的使用寿命和泵的工作效率。因此,选择合适的膜片材料和正确的维护保养方法对于威尔顿气动隔膜泵的使用非常重要。

威尔顿气动隔膜泵膜片密封件四氟产品图 威尔顿气动隔膜泵膜片密封件四氟及设备产品图

一、膜片材料的选择

威尔顿气动隔膜泵膜片材料一般有聚四氟乙烯、氯丁橡胶、氟橡胶等几种。不同的材料有不同的优缺点,需要根据具体情况选择。

 

1.聚四氟乙烯膜片

聚四氟乙烯膜片具有优异的耐腐蚀性、耐高温性、耐磨损性和耐老化性,可以在-20℃至150℃的范围内使用。由于聚四氟乙烯的化学稳定性很高,因此可以在处理腐蚀性液体和高温液体时使用。但是,聚四氟乙烯膜片的弹性较差,容易变形和破裂,且价格较高。

 

2.氯丁橡胶膜片

氯丁橡胶膜片具有良好的耐油性、耐磨性、耐老化性和耐热性,在-30℃至100℃的范围内使用。氯丁橡胶膜片弹性好,不易变形,价格相对较低。但是,氯丁橡胶膜片在处理高浓度酸、碱、溶剂等强腐蚀性介质时容易老化,使用寿命较短。

 

3.氟橡胶膜片

氟橡胶膜片具有良好的耐腐蚀性、耐高温性、耐磨损性和耐老化性,在-20℃至150℃的范围内使用。由于氟橡胶的化学稳定性很高,因此可以在处理腐蚀性液体和高温液体时使用。但是,氟橡胶膜片的弹性较差,容易变形和破裂,且价格较高。

因此,根据不同的介质和工况要求,选择合适的膜片材料是非常重要的。

 

二、膜片的故障分析及处理方法

1.老化

膜片老化是威尔顿气动隔膜泵常见的故障之一。随着膜片使用时间的增加,其弹性会逐渐降低,变硬变脆,容易破裂或变形。膜片老化的主要原因是氧化、光照、热、酸、碱等介质的侵蚀。

处理方法:定期更换膜片,避免使用过期或存放不当的膜片,同时保持泵的清洁和维护,避免介质对膜片的侵蚀。

 

2.破裂

膜片的破裂可能是由于介质的冲击或过载引起的。当介质的压力超过膜片所能承受的极限时,膜片就会破裂。

处理方法:定期检查膜片的状况,及时更换破损的膜片,避免介质过载或压力过高。

 

3.变形

膜片的变形可能是由于介质的温度或压力变化引起的。当介质的温度或压力超过膜片所能承受的极限时,膜片就会发生变形,从而影响泵的工作效率。

处理方法:避免介质温度或压力过高,选择合适的膜片材料,定期检查膜片的状况,及时更换变形的膜片。

 

三、膜片的生产工艺和质量控制

威尔顿气动隔膜泵的膜片生产工艺和质量控制非常重要,直接关系到产品的质量和性能。

1.材料采购

威尔顿气动隔膜泵的膜片生产需要采购优质的原材料,如聚四氟乙烯、氯丁橡胶、氟橡胶等。在采购过程中,需要对材料进行严格的检验和评估,确保材料的质量符合产品的要求。

2.生产工艺控制

在膜片的生产过程中,需要控制各个环节的工艺参数,如温度、压力、时间等,以确保产品的一致性和稳定性。同时,需要对每个生产批次进行质量检查和测试,确保产品符合相关标准和要求。

3.产品检验

威尔顿气动隔膜泵的膜片需要进行严格的产品检验和测试,包括外观检查、尺寸检查、弹性测试、压力测试等。只有通过严格的产品检验和测试,才能确保产品的质量和性能。

 

四、膜片的维护保养技巧

1.清洗

在泵的使用过程中,膜片可能会受到介质的污染或沉积物的堆积,影响其使用寿命和工作效率。因此,需要定期清洗膜片,避免介质对膜片的侵蚀和污染。

2.更换

膜片的使用寿命有限,一般需要定期更换。在更换膜片时,需要选择合适的膜片材料,并按照正确的安装方法进行更换,以确保产品的质量和性能。

3.保养

威尔顿气动隔膜泵的膜片需要定期进行保养,如涂抹防腐剂、加油、检查密封等。定期保养可以延长膜片的使用寿命和泵的工作效率。

总之,威尔顿气动隔膜泵的膜片是该泵的核心部件之一,选择合适的材料、正确的维护保养方法和严格的。

 

Wilton pneumatic diaphragm pump is a type of pump that is powered by air pressure and uses the diaphragm inside the diaphragm pump chamber to suction and discharge liquids. The diaphragm is one of the core components of the Wilton pneumatic diaphragm pump, and its quality and performance are directly related to the pump’s service life and work efficiency. Therefore, selecting appropriate diaphragm materials and correct maintenance methods is crucial for the use of Wilton pneumatic diaphragm pumps.

 

 

1、 Selection of Diaphragm Materials

The diaphragm materials of Wilton pneumatic diaphragm pumps generally include polytetrafluoroethylene, chloroprene rubber, fluororubber, and other types. Different materials have different advantages and disadvantages, which need to be selected according to specific situations.

 

  1. PTFE membrane

PTFE membranes have excellent corrosion resistance, high temperature resistance, wear resistance, and aging resistance, and can be used in the range of -20 ℃ to 150 ℃. Because of its high chemical stability, polytetrafluoroethylene can be used to treat corrosive liquids and high-temperature liquids. However, polytetrafluoroethylene membranes have poor elasticity, are prone to deformation and rupture, and are more expensive.

 

  1. Neoprene diaphragm

Neoprene rubber membranes have good oil resistance, wear resistance, aging resistance, and heat resistance, and can be used in the range of -30 ℃ to 100 ℃. Neoprene rubber membranes have good elasticity, are not easily deformed, and are relatively inexpensive. However, chloroprene rubber membranes are prone to aging and have a shorter service life when dealing with highly corrosive media such as high concentrations of acids, alkalis, and solvents.

 

  1. Fluorine rubber diaphragm

Fluorine rubber membranes have good corrosion resistance, high temperature resistance, wear resistance, and aging resistance, and can be used in the range of -20 ℃ to 150 ℃. Due to the high chemical stability of fluororubber, it can be used in the treatment of corrosive liquids and high-temperature liquids. However, fluororubber membranes have poor elasticity, are prone to deformation and rupture, and are more expensive.

Therefore, it is very important to choose appropriate membrane materials based on different media and operating conditions.

 

 

2、 Fault Analysis and Handling Methods of Diaphragm

  1. Aging

Diaphragm aging is one of the common faults in Wilton pneumatic diaphragm pumps. As the usage time of the membrane increases, its elasticity will gradually decrease, become hard and brittle, and it is easy to crack or deform. The main reason for membrane aging is the erosion of media such as oxidation, light, heat, acid, and alkali.

Treatment method: Regularly replace the diaphragm, avoid using expired or improperly stored diaphragms, and keep the pump clean and maintained to avoid medium erosion of the diaphragm.

 

  1. Rupture

The rupture of the diaphragm may be caused by the impact or overload of the medium. When the pressure of the medium exceeds the limit that the diaphragm can withstand, the diaphragm will rupture.

Solution: Regularly check the condition of the membrane, replace damaged membranes in a timely manner, and avoid medium overload or high pressure.

 

  1. Deformation

The deformation of the diaphragm may be caused by changes in temperature or pressure of the medium. When the temperature or pressure of the medium exceeds the limit that the diaphragm can withstand, the diaphragm will deform, thereby affecting the working efficiency of the pump.

Solution: Avoid excessive medium temperature or pressure, choose suitable diaphragm materials, regularly check the condition of the diaphragm, and replace deformed diaphragms in a timely manner.

 

3、 Production process and quality control of membranes

The diaphragm production process and quality control of Wilton pneumatic diaphragm pump are very important, directly related to the quality and performance of the product.

 

  1. Material procurement

The production of membranes for Wilton pneumatic diaphragm pumps requires the procurement of high-quality raw materials, such as polytetrafluoroethylene, chloroprene rubber, fluororubber, etc. During the procurement process, strict inspection and evaluation of materials are required to ensure that their quality meets the requirements of the product.

 

  1. Production process control

In the production process of the diaphragm, it is necessary to control the process parameters of various links, such as temperature, pressure, time, etc., to ensure the consistency and stability of the product. At the same time, quality inspection and testing are required for each production batch to ensure that the product meets relevant standards and requirements.

 

  1. Product inspection

The diaphragm of Wilton pneumatic diaphragm pump requires strict product inspection and testing, including appearance inspection, dimensional inspection, elasticity testing, pressure testing, etc. Only through strict product inspection and testing can the quality and performance of the product be ensured.

 

 

4、 Maintenance Techniques for Diaphragms

  1. Cleaning

During the use of the pump, the diaphragm may be contaminated by the medium or accumulate sediment, affecting its service life and work efficiency. Therefore, it is necessary to regularly clean the membrane to avoid medium erosion and contamination of the membrane.

 

  1. Replacement

The service life of the diaphragm is limited and generally requires regular replacement. When replacing the diaphragm, it is necessary to choose the appropriate diaphragm material and follow the correct installation method to ensure the quality and performance of the product.

 

  1. Maintenance

The diaphragm of Wilton pneumatic diaphragm pump needs regular maintenance, such as applying anti-corrosion agents, adding oil, and checking the sealing. Regular maintenance can extend the service life of the diaphragm and the efficiency of the pump.

In short, the diaphragm of the Wilton pneumatic diaphragm pump is one of the core components of the pump, and the selection of appropriate materials, correct maintenance methods, and strict

威尔顿气动隔膜泵膜片,密封件材料,故障分析,维护保养

液压密封件|车削密封圈|油缸密封件|广东佛山密封件厂家批发定制 – 爱密特密封件公司  https://am

威尔顿气动隔膜泵所有型号应用清单及膜片隔膜配件特点和维护!

此文威尔顿气动隔膜泵挖掘了史上很全的气动隔膜泵设备的所有型号、基本参数、应用范围、膜片专属配件,东晟密封件先告诉您以及威尔顿气动隔膜泵专属进口PTFE气动隔膜泵膜片密封件的材料选择造型和更换、维护保养故障处理资料分享!

威尔顿气动隔膜泵产品图 威尔顿气动隔膜泵膜片密封件四氟产品图 威尔顿气动隔膜泵膜片密封件四氟及设备产品图

一、对于威尔顿气动隔膜泵,膜片是其重要的组成部分之一。威尔顿气动隔膜泵膜片主要有以下特点:

  • 材料选择:威尔顿气动隔膜泵膜片的材料可根据介质的性质和使用条件的要求进行选择,如氟橡胶、氯丁橡胶、乙丙橡胶、丁基橡胶、聚四氟乙烯等。
  • 弹性好:威尔顿气动隔膜泵膜片具有良好的弹性,能够适应不同的工作条件和介质。
  • 耐腐蚀:威尔顿气动隔膜泵膜片的材料具有耐腐蚀性能,能够适应不同的介质,延长使用寿命。
  • 耐磨损:威尔顿气动隔膜泵膜片具有良好的耐磨损性能,能够适应高强度、高频率的工作要求。
  • 易更换:威尔顿气动隔膜泵膜片易于更换,无需专业人员,简单易行。

 

二、在使用威尔顿气动隔膜泵时,需要注意以下膜片相关的问题:

  • 膜片的选择:根据介质的性质和使用条件的要求,选择合适的膜片材料。
  • 膜片的更换:根据使用情况和维护计划,定期更换膜片,以确保气动隔膜泵的正常工作和延长使用寿命。
  • 膜片的维护保养:对于已经安装的膜片,需要进行定期的维护保养,如清洗、润滑、检查等,以确保其正常工作和延长使用寿命。
  • 膜片的故障处理:如果膜片发生故障,需要及时处理,如更换、修复等,以确保气动隔膜泵的正常运行。

 

型号:P025
最大流量:19.3 LPM
最大压力:8.6 bar
应用范围:低流量、低压力的应用,如化学品喷涂、印刷、清洗等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P025
最大流量:19.3 LPM
最大压力:8.6 bar
应用范围:低流量、低压力的应用,如化学品喷涂、印刷、清洗等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P050
最大流量:49.2 LPM
最大压力:8.6 bar
应用范围:中等流量、中等压力的应用,如化学品输送、污水处理、食品加工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P050
最大流量:49.2 LPM
最大压力:8.6 bar
应用范围:中等流量、中等压力的应用,如化学品输送、污水处理、食品加工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P050
最大流量:49.2 LPM
最大压力:8.6 bar
应用范围:中等流量、中等压力的应用,如化学品输送、污水处理、食品加工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:PX80
最大流量:152 LPM
最大压力:8.6 bar
应用范围:高流量、中等压力的应用,如化学品输送、污水处理、石油化工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P100
最大流量:151 LPM
最大压力:8.6 bar
应用范围:高流量、高压力的应用,如矿物浆输送、化学品加工、石油化工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P100
最大流量:151 LPM
最大压力:8.6 bar
应用范围:高流量、高压力的应用,如矿物浆输送、化学品加工、石油化工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P100
最大流量:151 LPM
最大压力:8.6 bar
应用范围:高流量、高压力的应用,如矿物浆输送、化学品加工、石油化工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P100
最大流量:151 LPM
最大压力:8.6 bar
应用范围:高流量、高压力的应用,如矿物浆输送、化学品加工、石油化工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P100
最大流量:151 LPM
最大压力:8.6 bar
应用范围:高流量、高压力的应用,如矿物浆输送、化学品加工、石油化工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P100
最大流量:151 LPM
最大压力:8.6 bar
应用范围:高流量、高压力的应用,如矿物浆输送、化学品加工、石油化工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P400
最大流量:1665 LPM
最大压力:8.6 bar
应用范围:超高流量、中等压力的应用,如石油化工、水泥制造、污水处理等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:PX400
最大流量:3330 LPM
最大压力:8.6 bar
应用范围:超高流量、中等压力的应用,如石油化工、水泥制造、污水处理等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:PX400
最大流量:3330 LPM
最大压力:8.6 bar
应用范围:超高流量、中等压力的应用,如石油化工、水泥制造、污水处理等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:PX800
最大流量:6240 LPM
最大压力:8.6 bar
应用范围:超高流量、中等压力的应用,如石油化工、水泥制造、污水处理等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:PX800
最大流量:6240 LPM
最大压力:8.6 bar
应用范围:超高流量、中等压力的应用,如石油化工、水泥制造、污水处理等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:PX1500
最大流量:12496 LPM
最大压力:8.6 bar
应用范围:极高流量、中等压力的应用,如化学品输送、食品加工、石油化工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:PX1500
最大流量:12496 LPM
最大压力:8.6 bar
应用范围:极高流量、中等压力的应用,如化学品输送、食品加工、石油化工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:PX2000
最大流量:20834 LPM
最大压力:8.6 bar
应用范围:超高流量、中等压力的应用,如石油化工、水泥制造、污水处理等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P4000
最大流量:41667 LPM
最大压力:8.6 bar
应用范围:超高流量、中等压力的应用,如石油化工、水泥制造、污水处理等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P4000
最大流量:41667 LPM
最大压力:8.6 bar
应用范围:超高流量、中等压力的应用,如石油化工、水泥制造、污水处理等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P025
最大流量:76 LPM
最大压力:8.6 bar
应用范围:低流量、低压力应用,如实验室、化学品输送等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:PX025
最大流量:152 LPM
最大压力:8.6 bar
应用范围:低流量、低压力应用,如实验室、化学品输送等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P050
最大流量:151 LPM
最大压力:8.6 bar
应用范围:中等流量、低压力应用,如食品加工、印染、石油化工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:PX050
最大流量:303 LPM
最大压力:8.6 bar
应用范围:中等流量、低压力应用,如食品加工、印染、石油化工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:PX050
最大流量:303 LPM
最大压力:8.6 bar
应用范围:中等流量、低压力应用,如食品加工、印染、石油化工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:PX100
最大流量:566 LPM
最大压力:8.6 bar
应用范围:中等流量、中等压力应用,如化工、石油化工、食品加工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:PX100
最大流量:566 LPM
最大压力:8.6 bar
应用范围:中等流量、中等压力应用,如化工、石油化工、食品加工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:PX200
最大流量:1132 LPM
最大压力:8.6 bar
应用范围:高流量、中等压力应用,如化学品输送、污水处理、石油化工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P400
最大流量:1132 LPM
最大压力:8.6 bar
应用范围:高流量、中等压力应用,如化学品输送、污水处理、石油化工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P400
最大流量:1132 LPM
最大压力:8.6 bar
应用范围:高流量、中等压力应用,如化学品输送、污水处理、石油化工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P800
最大流量:2265 LPM
最大压力:8.6 bar
应用范围:超高流量、中等压力应用,如石油化工、水泥制造、污水处理等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P800
最大流量:2265 LPM
最大压力:8.6 bar
应用范围:超高流量、中等压力应用,如石油化工、水泥制造、污水处理等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:P1500
最大流量:4530 LPM
最大压力:8.6 bar
应用范围:极高流量、中等压力应用,如化学品输送、食品加工、石油化工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件
型号:PX1500
最大流量:9060 LPM
最大压力:8.6 bar
应用范围:极高流量、中等压力应用,如化学品输送、食品加工、石油化工等。
膜片配件 :进口PTFE气动隔膜泵膜片密封件

 

 

This article explores all the models, basic parameters, application ranges, and diaphragm exclusive accessories of the all-time pneumatic diaphragm pump equipment in Wilton Pneumatic Diaphragm Pump. Qisheng New Materials will first tell you and share information on the material selection, design, replacement, maintenance, and troubleshooting of the PTFE pneumatic diaphragm pump diaphragm seals exclusively imported from Wilton Pneumatic Diaphragm Pump!

 

1、 For Wilton pneumatic diaphragm pumps, the diaphragm is one of its important components. The diaphragm of Wilton pneumatic diaphragm pump mainly has the following characteristics:

Material selection: The materials for the diaphragm of Wilton pneumatic diaphragm pump can be selected based on the properties of the medium and the requirements of the usage conditions, such as fluororubber, chloroprene rubber, ethylene propylene rubber, butyl rubber, polytetrafluoroethylene, etc.

Good elasticity: The diaphragm of Wilton pneumatic diaphragm pump has good elasticity and can adapt to different working conditions and media.

Corrosion resistance: The material of the Wilton pneumatic diaphragm pump diaphragm has corrosion resistance, which can adapt to different media and extend its service life.

Wear resistance: The Wilton pneumatic diaphragm pump diaphragm has good wear resistance and can adapt to high intensity and high frequency work requirements.

Easy to replace: The diaphragm of Wilton pneumatic diaphragm pump is easy to replace, without the need for professional personnel, and is simple and easy to operate.

 

2、 When using Wilton pneumatic diaphragm pumps, it is necessary to pay attention to the following diaphragm related issues:

Selection of diaphragm: Select appropriate diaphragm materials based on the properties of the medium and the requirements of usage conditions.

Replacement of diaphragm: Regularly replace the diaphragm according to usage and maintenance plan to ensure the normal operation and extended service life of the pneumatic diaphragm pump.

Maintenance and upkeep of diaphragms: For installed diaphragms, regular maintenance and upkeep are required, such as cleaning, lubrication, inspection, etc., to ensure their normal operation and extend their service life.

Diaphragm fault handling: If the diaphragm malfunctions, it needs to be promptly addressed, such as replacement, repair, etc., to ensure the normal operation of the pneumatic diaphragm pump.

 

The following table content:

l P025

Maximum flow rate: 19.3 LPM

Maximum pressure: 8.6 bar

Application scope: Low flow and low pressure applications, such as chemical spraying, printing, cleaning, etc.

 

l PX25

Maximum flow rate: 38.6 LPM

Maximum pressure: 8.6 bar

Application scope: Low flow and low pressure applications, such as chemical spraying, printing, cleaning, etc.

 

l P050

Maximum flow rate: 49.2 LPM

Maximum pressure: 8.6 bar

Application scope: Medium flow and medium pressure applications, such as chemical transportation, sewage treatment, food processing, etc.

 

l PX50

Maximum flow rate: 98.4 LPM

Maximum pressure: 8.6 bar

Application scope: Medium flow and medium pressure applications, such as chemical transportation, sewage treatment, food processing, etc.

 

l P080

Maximum flow rate: 76 LPM

Maximum pressure: 8.6 bar

Application scope: High flow, medium pressure applications, such as chemical transportation, sewage treatment, petrochemical industry, etc.

 

l PX80

Maximum flow rate: 152 LPM

Maximum pressure: 8.6 bar

Application scope: High flow, medium pressure applications, such as chemical transportation, sewage treatment, petrochemical industry, etc.

 

l P100

Maximum flow rate: 151 LPM

Maximum pressure: 8.6 bar

Application scope: High flow and high pressure applications, such as mineral slurry transportation, chemical processing, petrochemical industry, etc.

 

l PX100

Maximum flow rate: 302 LPM

Maximum pressure: 8.6 bar

Application scope: High flow and high pressure applications, such as mineral slurry transportation, chemical processing, petrochemical industry, etc.

 

l P150

Maximum flow rate: 416 LPM

Maximum pressure: 8.6 bar

Application scope: Applications with extremely high flow rates and medium pressure, such as chemical transportation, food processing, petrochemical industry, etc.

 

l PX150

Maximum flow rate: 832 LPM

Maximum pressure: 8.6 bar

Application scope: Applications with extremely high flow rates and medium pressure, such as chemical transportation, food processing, petrochemical industry, etc.

 

l P200

Maximum flow rate: 834 LPM

Maximum pressure: 8.6 bar

Application scope: Applications with extremely high flow rates and medium pressure, such as chemical transportation, food processing, petrochemical industry, etc.

 

l PX200

Maximum flow rate: 1668 LPM

Maximum pressure: 8.6 bar

Application scope: Applications with extremely high flow rates and medium pressure, such as chemical transportation, food processing, petrochemical industry, etc.

 

l P400

Maximum flow rate: 1665 LPM

Maximum pressure: 8.6 bar

Application scope: Applications with ultra-high flow rate and medium pressure, such as petrochemical, cement manufacturing, sewage treatment, etc.

 

l PX400

Maximum flow rate: 3330 LPM

Maximum pressure: 8.6 bar

Application scope: Applications with ultra-high flow rate and medium pressure, such as petrochemical, cement manufacturing, sewage treatment, etc.

 

l P800

Maximum flow rate: 3120 LPM

Maximum pressure: 8.6 bar

Application scope: Applications with ultra-high flow rate and medium pressure, such as petrochemical, cement manufacturing, sewage treatment, etc.

 

l PX800

Maximum flow rate: 6240 LPM

Maximum pressure: 8.6 bar

Application scope: Applications with ultra-high flow rate and medium pressure, such as petrochemical, cement manufacturing, sewage treatment, etc.

 

l P1500

Maximum flow rate: 6248 LPM

Maximum pressure: 8.6 bar

Application scope: Applications with extremely high flow rates and medium pressure, such as chemical transportation, food processing, petrochemical industry, etc.

 

l PX1500

Maximum flow rate: 12496 LPM

Maximum pressure: 8.6 bar

Application scope: Applications with extremely high flow rates and medium pressure, such as chemical transportation, food processing, petrochemical industry, etc.

 

l P2000

Maximum flow rate: 10417 LPM

Maximum pressure: 8.6 bar

Application scope: Applications with ultra-high flow rate and medium pressure, such as petrochemical, cement manufacturing, sewage treatment, etc.

 

l PX2000

Maximum flow rate: 20834 LPM

Maximum pressure: 8.6 bar

Application scope: Applications with ultra-high flow rate and medium pressure, such as petrochemical, cement manufacturing, sewage treatment, etc.

 

l P4000

Maximum flow rate: 41667 LPM

Maximum pressure: 8.6 bar

Application scope: Applications with ultra-high flow rate and medium pressure, such as petrochemical, cement manufacturing, sewage treatment, etc.

 

l PX4000

Maximum flow rate: 83334 LPM

Maximum pressure: 8.6 bar

Application scope: Applications with ultra-high flow rate and medium pressure, such as petrochemical, cement manufacturing, sewage treatment, etc.

 

l P025

Maximum flow rate: 76 LPM

Maximum pressure: 8.6 bar

Application scope: Low flow, low pressure applications, such as laboratory, chemical transportation, etc.

 

l PX025

Maximum flow rate: 152 LPM

Maximum pressure: 8.6 bar

Application scope: Low flow, low pressure applications, such as laboratory, chemical transportation, etc.

 

l P050

Maximum flow rate: 151 LPM

Maximum pressure: 8.6 bar

Application scope: Medium flow, low pressure applications, such as food processing, printing and dyeing, petrochemical industry, etc.

 

l PX050

Maximum flow rate: 303 LPM

Maximum pressure: 8.6 bar

Application scope: Medium flow, low pressure applications, such as food processing, printing and dyeing, petrochemical industry, etc.

 

l P100

Maximum flow rate: 283 LPM

Maximum pressure: 8.6 bar

Application scope: Medium flow, medium pressure applications, such as chemical, petrochemical, food processing, etc.

 

l PX100

Maximum flow rate: 566 LPM

Maximum pressure: 8.6 bar

Application scope: Medium flow, medium pressure applications, such as chemical, petrochemical, food processing, etc.

 

l P200

Maximum flow rate: 566 LPM

Maximum pressure: 8.6 bar

Application scope: High flow, medium pressure applications, such as chemical transportation, sewage treatment, petrochemical industry, etc.

 

l PX200

Maximum flow rate: 1132 LPM

Maximum pressure: 8.6 bar

Aplication scope: High flow, medium pressure applications, such as chemical transportation, sewage treatment, petrochemical industry, etc.

 

l P400

Maximum flow rate: 1132 LPM

Maximum pressure: 8.6 bar

Application scope: High flow, medium pressure applications, such as chemical transportation, sewage treatment, petrochemical industry, etc.

 

l PX400

Maximum flow rate: 2265 LPM

Maximum pressure: 8.6 bar

Application scope: High flow, medium pressure applications, such as chemical transportation, sewage treatment, petrochemical industry, etc.

 

l P800

Maximum flow rate: 2265 LPM

Maximum pressure: 8.6 bar

Application scope: Ultra high flow, medium pressure applications, such as petrochemical, cement manufacturing, sewage treatment, etc.

 

l PX800

Maximum flow rate: 4530 LPM

Maximum pressure: 8.6 bar

Application scope: Ultra high flow, medium pressure applications, such as petrochemical, cement manufacturing, sewage treatment, etc.

 

l P1500

Maximum flow rate: 4530 LPM

Maximum pressure: 8.6 bar

Application scope: High flow rate, medium pressure applications, such as chemical transportation, food processing, petrochemical industry, etc.

 

l PX1500

Maximum flow rate: 9060 LPM

Maximum pressure: 8.6 bar

Application scope: High flow rate, medium pressure applications, such as chemical transportation, food processing, petrochemical industry, etc.

 

 

威尔顿气动隔膜泵,型号清单,膜片,隔膜,气动隔膜泵膜片

液压密封件|车削密封圈|油缸密封件|广东佛山密封件厂家批发定制 – 爱密特密封件公司  https://amtmf.com/

 

 

 

胜佰德WILDE气动隔膜泵所有系列及其隔膜材料特性

胜佰德WILDE气动隔膜泵型号所有系列包括QBY、QBY–D、QBY-EC等系列,爱密特密封件告诉您以及应用于胜佰德WILDE气动隔膜泵隔膜密封件配件的4种材料应用特性介质简述。

 

一、隔膜密封件配件是气动隔膜泵的核心部件之一,直接影响到泵的性能和使用寿命。胜佰德WILDE气动隔膜泵系列的隔膜采用高耐磨、高韧性、高强度的材料制成,如氯丁橡胶、氟橡胶、丁晴橡胶、聚四氟乙烯等。这些材料具有以下特点:

  • 氯丁橡胶隔膜密封件:抗磨损、耐油、耐酸碱、耐老化。
  • 氟橡胶隔膜密封件:抗腐蚀、耐高温、耐氧化、抗臭氧。
  • 丁晴橡胶隔膜密封件:抗磨损、耐油、耐酸碱、耐老化。
  • 聚四氟乙烯隔膜密封件(推荐材料之一):耐腐蚀、耐高温、低摩擦、低粘度。

胜佰德气动隔膜泵膜片密封件产品图

不同类型的隔膜适用于不同的介质和工况。例如,氯丁橡胶隔膜适用于一般介质,丁晴橡胶隔膜适用于耐磨介质,氟橡胶隔膜适用于耐腐蚀、高温介质,聚四氟乙烯隔膜适用于高纯介质。在选择隔膜时,需要根据介质的特性、温度、压力等因素进行选择,以确保泵的正常运行和长寿命。

 

 

 

二、胜佰德WILDE气动隔膜泵所有系列型号介绍:

  • WILDE QBY系列气动隔膜泵
  • WILDE QBY-D系列双隔膜气动隔膜泵
  • WILDE QBY-EC系列气动隔膜泵
  • WILDE QBY-F系列食品级气动隔膜泵
  • WILDE QBY-PP系列聚丙烯气动隔膜泵
  • WILDE QBY-G系列气动隔膜泵
  • WILDE QBY-H系列高温气动隔膜泵
  • WILDE QBY-K系列气动隔膜泵
  • WILDE QBY-L系列低噪音气动隔膜泵
  • WILDE QBY-R系列耐磨气动隔膜泵
  • WILDE QBY-S系列不锈钢气动隔膜泵
  • WILDE QBY-T系列特殊流体气动隔膜泵
  • WILDE QBY-V系列自吸气动隔膜泵
  • WILDE QBY-X系列耐腐蚀气动隔膜泵
  • WILDE QBY-Z系列化学品用气动隔膜泵

胜佰德气动隔膜泵08-20-30-36-993457系列产品图

以下英文版:

Shengbaide WILDE Pneumatic Diaphragm Pump Models All series include QBY, QBY-D, QBY-EC, and other series. Qisheng New Materials tells you about the four material application characteristics and media used in Shengbaide WILDE Pneumatic Diaphragm Pump Diaphragm Seal Accessories.

 

1、 Diaphragm sealing parts are one of the core components of pneumatic diaphragm pumps, which directly affect the performance and service life of the pump. The diaphragm of the Shengbaide WILDE pneumatic diaphragm pump series is made of materials with high wear resistance, high toughness, and high strength, such as chloroprene rubber, fluororubber, nitrile rubber, polytetrafluoroethylene, etc. These materials have the following characteristics:

 

  • Neoprene diaphragm seals: resistant to wear, oil, acid and alkali, and aging.
  • Fluorine rubber diaphragm seals: corrosion-resistant, high-temperature resistant, oxidation resistant, and ozone resistant.
  • Neoprene rubber diaphragm seals: resistant to wear, oil, acid and alkali, and aging.
  • PTFE diaphragm seal (one of the recommended materials): corrosion-resistant, high-temperature resistant, low friction, and low viscosity.

 

Different types of diaphragms are suitable for different media and operating conditions. For example, chloroprene rubber diaphragms are suitable for general media, nitrile rubber diaphragms are suitable for wear-resistant media, fluororubber diaphragms are suitable for corrosion-resistant and high-temperature media, and polytetrafluoroethylene diaphragms are suitable for high-purity media. When selecting a diaphragm, it is necessary to choose based on factors such as the characteristics of the medium, temperature, pressure, etc. to ensure the normal operation and long service life of the pump.

 

 

 

 

 

2、 Introduction to all series models of Shengbaide WILDE pneumatic diaphragm pumps:

  • WILDE QBY series pneumatic diaphragm pump
  • WILDE QBY-D series double diaphragm pneumatic diaphragm pump
  • WILDE QBY-EC series pneumatic diaphragm pump
  • WILDE QBY-F series food grade pneumatic diaphragm pump
  • WILDE QBY-PP series polypropylene pneumatic diaphragm pump
  • WILDE QBY-G series pneumatic diaphragm pump
  • WILDE QBY-H series high-temperature pneumatic diaphragm pump
  • WILDE QBY-K series pneumatic diaphragm pump
  • WILDE QBY-L series low noise pneumatic diaphragm pump
  • WILDE QBY-R series wear-resistant pneumatic diaphragm pump
  • WILDE QBY-S series stainless steel pneumatic diaphragm pump
  • WILDE QBY-T series special fluid pneumatic diaphragm pump
  • WILDE QBY-V series self aspirated diaphragm pump
  • WILDE QBY-X series corrosion-resistant pneumatic diaphragm pump
  • WILDE QBY-Z series chemical pneumatic diaphragm pump

 

 

胜佰德,WILDE,气动隔膜泵隔膜,隔膜,材料特性
液压密封件|车削密封圈|油缸密封件|广东佛山密封件厂家批发定制 – 爱密特密封件公司  https://amtmf.com/

胜佰德气动隔膜泵08-20-30-36-993457系列产品图 胜佰德气动隔膜泵膜片密封件产品图

所有米顿罗计量泵系列及膜片密封件配件的应用概述大全!

米顿罗Milton Roy 智能计量泵膜片密封件产品图

米顿罗(Milton Roy)提供多个系列的计量泵和配件,包括隔膜泵、蠕动泵、活塞泵、离心泵和齿轮泵等。其中,隔膜泵适用于高精度、高压和腐蚀性较强的流体输送。米顿罗提供多种隔膜泵系列和配件,爱密特密封件告诉您如米顿罗计量泵膜片密封件系列 、控制器、传感器、阀门、接头和管件等,可实现对隔膜泵的性能和运行状态的监测和管理,优化流体输送和控制。

 

一、米顿罗计量泵所有型号系列及型号应用领域简述:

  • Milroyal系列:适用于多种流体计量及计量泵膜片密封件配件的应用,括Milroyal G、Milroyal H、Milroyal I、Milroyal K等型号。
  • mROY系列:适用于化学品加注和处理,包括mROY A、mROY B、mROY C、mROY AA、mROY AB等型号。
  • MAXROY系列:适用于高压计量泵膜片密封件配件的应用,包括MAXROY R、MAXROY M、MAXROY B等型号。
  • MACROY系列:适用于流量稳定和精度高的应用,包括MACROY Q、MACROY DX、MACROY EZ等型号。
  • Centrac系列:适用于化学品加注和处理,包括Centrac C、Centrac E等型号。
  • Prime系列:适用于化学品加注和处理++计量泵膜片密封件配件,包括Prime A、Prime B、Prime C等型号。
  • Milroyal D系列:适用于水处理、环保和化学工业等领域,包括Milroyal D、Milroyal D31等型号。
  • Milroyal G系列:适用于水处理、环保和化学工业等领域,包括Milroyal G、Milroyal G31等型号。
  • Milroyal H系列:适用于石油化工、水处理和食品加工等领域,包括Milroyal H、Milroyal H31等型号。
  • Milroyal I系列:适用于制药、食品加工和化学工业等领域+计量泵膜片密封件配件,包括Milroyal I、Milroyal I31等型号。
  • Milroyal K系列:适用于石油化工、水处理和制药等领域,包括Milroyal K、Milroyal K31等型号。
  • Milroyal L系列:适用于化学工业、环保和水处理等领域+计量泵膜片密封件配件,包括Milroyal L、Milroyal L31等型号。
  • Milroyal P系列:适用于化学工业、环保和水处理等领域,包括Milroyal P、Milroyal P31等型号。
  • Milroyal T系列:适用于石油化工、制药和化学工业等领域,包括Milroyal T、Milroyal T31等型号。
  • Milroyal V系列:适用于化学品加注和处理+计量泵膜片密封件配件,包括Milroyal V、Milroyal V21等型号。
  • Milroyal W系列:适用于化学品加注和处理,包括Milroyal W、Milroyal W21等型号。
  • Milroyal X系列:适用于化学品加注和处理,包括Milroyal X、Milroyal X21等型号。
  • Milroyal Z系列:适用于化学品加注和处理+计量泵膜片密封件配件,包括Milroyal Z、Milroyal Z21等型号。

米顿罗(Milton Roy)睿智系列 智能计量泵系列产品图

 

二、除了不同系列的型号外,米顿罗(Milton Roy)还提供了不同种类的计量泵,包括以下几种:

  • 蠕动泵(Peristaltic Pumps):蠕动泵采用压缩软管的原理进行流体输送,适用于低粘度、高纯度、易挥发的流体。
  • 隔膜泵(Diaphragm Pumps):隔膜泵通过隔膜的振动进行流体输送,适用于要求高精度和高压的流体。
  • 活塞泵(Plunger Pumps):活塞泵采用往复式活塞进行流体输送+计量泵膜片密封件配件,适用于高压、高粘度的流体。
  • 离心泵(Centrifugal Pumps):离心泵通过离心力进行流体输送+计量泵膜片密封件配件,适用于低粘度、高流量的流体。
  • 齿轮泵(Gear Pumps):齿轮泵采用齿轮的转动进行流体输送+计量泵膜片密封件配件,适用于低流量、高粘度的流体。

 

三、米顿罗(Milton Roy)还提供了一些附加的组件和配件+计量泵膜片密封件配件,以帮助用户更好地使用和维护计量泵,包括以下几种:

  • 控制器(Controllers):控制器可以监测和控制计量泵的流量、压力和速度等参数,以确保泵的性能和稳定性。
  • 传感器(Sensors):传感器可以测量和监测流体的温度、压力、pH值和浓度等参数,以帮助用户更好地了解和掌握流体的特性和变化。
  • 阀门(Valves):阀门可以控制计量泵的进出口流量,以便调节流体的输送量和速率。
  • 接头和管件(Fittings and Connectors):接头和管件可以连接计量泵和管道,以确保流体的无泄漏输送。
  • 软件和控制系统(Software and Control Systems):软件和控制系统可以监测和管理多个计量泵的性能和运行状态,以便优化流体输送和控制。

 

以下英文版:

Milton Roy offers multiple series of metering pumps and accessories, including diaphragm pumps, peristaltic pumps, piston pumps, centrifugal pumps, and gear pumps. Among them, diaphragm pumps are suitable for high-precision, high-pressure, and highly corrosive fluid transportation. Milton Roe offers a variety of diaphragm pump series and accessories. Qisheng New Materials tells you that such as the Milton Roe metering pump diaphragm seal series, controllers, sensors, valves, joints, and fittings, it can achieve monitoring and management of the performance and operating status of diaphragm pumps, optimize fluid delivery and control.

 

1、 Overview of all models, series, and application fields of Milton Roe metering pumps:

  • Milroyal series: suitable for various applications of fluid metering and metering pump diaphragm seal accessories, including models such as Milroyal G, Milroyal H, Milroyal I, and Milroyal K.
  • MROY series: suitable for chemical filling and treatment, including mROY A, mROY B, mROY C, mROY AA, mROY AB and other models.
  • MAXROY series: suitable for the application of high-pressure metering pump diaphragm seal accessories, including models such as MAXROY R, MAXROY M, and MAXROY B.
  • MACROY series: suitable for applications with stable flow and high accuracy, including MACROY Q, MACROY DX, MACROY EZ and other models.
  • Centrac series: suitable for chemical filling and processing, including models such as Centrac C and Centrac E.
  • Prime series: Suitable for chemical filling and treatment++metering pump diaphragm seal accessories, including Prime A, Prime B, Prime C and other models.
  • Milroyal D series: suitable for water treatment, environmental protection, and chemical industry, including models such as Milroyal D and Milroyal D31.
  • Milroyal G series: suitable for water treatment, environmental protection, and chemical industry, including models such as Milroyal G and Milroyal G31.
  • Milroyal H series: suitable for fields such as petrochemical, water treatment, and food processing, including models such as Milroyal H and Milroyal H31.
  • Milroyal I series: suitable for pharmaceutical, food processing, and chemical industries, as well as metering pump diaphragm seal accessories, including models such as Milroyal I and Milroyal I31.
  • Milroyal K series: suitable for fields such as petrochemicals, water treatment, and pharmaceuticals, including models such as Milroyal K and Milroyal K31.
  • Milroyal L series: suitable for chemical industry, environmental protection, water treatment and other fields+metering pump diaphragm seal accessories, including Milroyal L, Milroyal L31 and other models.
  • Milroyal P series: suitable for the chemical industry, environmental protection, and water treatment fields, including models such as Milroyal P and Milroyal P31.
  • Milroyal T series: suitable for fields such as petrochemical, pharmaceutical, and chemical industries, including models such as Milroyal T and Milroyal T31.
  • Milroyal V series: suitable for chemical filling and processing+metering pump diaphragm seal accessories, including models such as Milroyal V and Milroyal V21.
  • Milroyal W series: suitable for chemical filling and processing, including models such as Milroyal W and Milroyal W21.
  • Milroyal X series: suitable for chemical filling and processing, including models such as Milroyal X and Milroyal X21.
  • Milroyal Z series: suitable for chemical filling and processing+metering pump diaphragm seal accessories, including models such as Milroyal Z and Milroyal Z21.

 

2、 In addition to different series models, Milton Roy also offers different types of metering pumps, including the following:

  • Peristaltic Pumps: Peristaltic pumps use the principle of compressed hoses for fluid transportation, suitable for low viscosity, high purity, and volatile fluids.
  • Diaphragm Pumps: Diaphragm pumps transport fluid through the vibration of the diaphragm, suitable for fluids that require high precision and high pressure.
  • Plunger Pumps: The piston pump uses reciprocating pistons for fluid delivery and metering pump diaphragm seals, suitable for high-pressure and high viscosity fluids.
  • Centrifugal Pumps: Centrifugal pumps deliver fluid through centrifugal force and are equipped with diaphragm seals for metering pumps, suitable for low viscosity and high flow fluids.
  • Gear Pumps: Gear pumps use the rotation of gears for fluid delivery and metering pump diaphragm seal accessories, suitable for low flow and high viscosity fluids.

 

3、 Milton Roy also provides some additional components and accessories, as well as metering pump diaphragm seal accessories, to help users better use and maintain metering pumps, including the following:

  • Controllers: The controller can monitor and control the flow, pressure, and speed parameters of the metering pump to ensure pump performance and stability.
  • Sensors: Sensors can measure and monitor parameters such as fluid temperature, pressure, pH value, and concentration to help users better understand and grasp the characteristics and changes of the fluid.
  • Valves: Valves can control the inlet and outlet flow of the metering pump to regulate the fluid delivery volume and rate.
  • Fitting and connectors: The fittings and fittings can connect the metering pump and pipeline to ensure leak free fluid delivery.
  • Software and Control Systems: Software and control systems can monitor and manage the performance and operating status of multiple metering pumps to optimize fluid delivery and control.

 

米顿罗,Milton Roy,计量泵膜片,应用概述,配件

液压密封件|车削密封圈|油缸密封件|广东佛山密封件厂家批发定制 – 爱密特密封件公司  https://amtmf.com/

 

 

 

世界嗓音日:为你的声音健康保驾护航

点击上方“蓝字”,关注更多精彩

今天4月16日是世界嗓音日,让我们一起关注和呵护我们的嗓子吧!

嗓音是我们与外界沟通的重要工具,它不仅仅是说话、唱歌的基础,还涉及到我们的情感表达和社交交流。但是,很多人并没有意识到嗓子的重要性,或者在日常生活中没有注意到如何保护嗓子。

在这个特别的日子里,我们应该更加关注嗓音的健康。以下是一些保护嗓子的小贴士:

一、多喝水:保持身体充足的水分,有助于保持喉咙的湿润和声音的清晰。

二、避免过度使用嗓子:如果你需要大声说话或唱歌,尝试减少时间或增加休息时间,以免过度使用嗓子。

三、避免吸烟和饮酒:吸烟和饮酒会刺激喉咙和声带,导致声音嘶哑或失声。

四、做声带保健:可以通过一些简单的声带保健练习,如深呼吸、轻声练习、张嘴伸舌等,来帮助嗓子健康。

在这个世界嗓音日,让我们一起行动起来,关注和保护我们的嗓子,让我们的声音更加美好、清晰!

Today is World Voice Day, let’s pay attention to and take care of our voices together!

 

Our voice is an important tool for communicating with the outside world. It is not only the basis for speaking and singing, but also involves our emotional expression and social interaction. However, many people are not aware of the importance of their voices, or do not know how to protect their voices in their daily lives.

 

On this special day, we should pay more attention to the health of our voices. Here are some tips for protecting our voices:

1. Drink plenty of water: keeping the body well hydrated helps to keep the throat moist and the voice clear.

2. Avoid overusing the voice: if you need to speak or sing loudly, try to reduce the time or increase rest time to avoid overusing the voice.

3. Avoid smoking and drinking alcohol: smoking and drinking alcohol can irritate the throat and vocal cords, leading to hoarseness or voice loss.

4. Do vocal exercises: simple vocal exercises such as deep breathing, whispering, and tongue stretching can help to keep the voice healthy.

On this World Voice Day, let’s take action together to pay attention to and protect our voices, and make our voices more beautiful and clear!

#世界嗓音日  #嗓音健康  #喉咙湿润  #声带保健  #喝水

01
END

全民安全教育日,生产制造全员安全教育更重要!

点击蓝字
关注我们
安全教育日

尊敬的各位同事:

今天是全国安全教育日,这是一个提醒我们重视生产制造安全的重要日子。

因此,我们必须时刻保持警惕,确保每个人的安全。在这个特殊的日子里,我们要向所有员工强调以下几点:

首先,安全第一。无论工作质量、工作速度还是工作效率如何,我们都不能牺牲员工的安全。在任何情况下,员工的身体健康都是最重要的。

其次,严格遵守规章制度。生产制造是一个需要高度协调和配合的领域,每个员工都必须严格遵守公司的规章制度,确保每个人都在安全的范围内工作。

最后,积极参与安全培训。我们要倡导员工积极参与各种安全培训,提高自身的安全意识和技能水平,确保每个人都能在生产制造过程中更加安全。

在这个特殊的日子里,我们再次呼吁每个员工都要将安全放在第一位,确保我们的生产制造过程更加安全、高效、稳定。让我们共同努力,守护每个人的安全!

Today is the National Safety Education Day, which reminds us of the importance of safety in the production and manufacturing industry. We know that production and manufacturing is a critical business for our company, but it is also a high-risk area. Therefore, we must always be vigilant and ensure everyone’s safety.

On this special day, we would like to emphasize the following points to all employees:

Firstly, safety comes first. Regardless of the quality, speed, or efficiency of our work, we cannot sacrifice the safety of our employees. In any situation, employee health is the most important.

Secondly, we must strictly follow rules and regulations. Production and manufacturing require high coordination and cooperation, and every employee must strictly follow the company’s rules and regulations to ensure that everyone works within a safe range.

Finally, we encourage employees to actively participate in safety training. We advocate that employees actively participate in various safety training to improve their safety awareness and skill level, ensuring that everyone can work more safely in the production and manufacturing process.

On this special day, we once again call on every employee to prioritize safety, ensuring that our production and manufacturing process is safer, more efficient, and more stable. Let us work together to safeguard everyone’s safety!

01
关注

气动隔膜泵膜片密封件设计与应用:材料设计、更换维护及性能寿命影响!

气动隔膜泵膜片密封件产品图

气动隔膜泵膜片密封件设计与应用是隔膜泵性能和寿命的关键因素之一。爱密特密封件告诉您本文将从膜片的材料选择、设计要点、更换维护等方面探讨气动隔膜泵膜片密封件设计与应用。

 

一、气动隔膜泵膜片材料选择:
气动隔膜泵膜片密封件通常由橡胶、聚四氟乙烯、聚酯等材料制成。这些材料具有一定的弹性和耐腐蚀性能,能够承受高压和高温。不同的材料具有不同的性能和适用范围,需要根据具体的工作条件和介质性质进行选择。

1、橡胶气动隔膜泵膜片;
橡胶膜片是隔膜泵常用的膜片材料之一,具有良好的耐腐蚀性能和耐磨性能,适用于输送中等浓度和低浓度的酸碱液、磨蚀性介质和食品等。常用的橡胶材料有氯丁橡胶、丁基橡胶、氟橡胶等。

2、聚四氟乙烯气动隔膜泵膜片;
聚四氟乙烯膜片是一种耐腐蚀性能极好的材料,能够承受极端的高温和强酸强碱介质,适用于输送强腐蚀性介质和高温介质。但由于其弹性较差,容易因受力而形变,不适用于输送颗粒较大的介质。此外,聚四氟乙烯膜片的价格较高,需要根据具体的工作条件和介质性质进行选择。

3、聚酯气动隔膜泵膜片;
聚酯膜片是一种价格较低、强度较高的材料,适用于输送中等浓度的酸碱液、食品等。但聚酯膜片的耐腐蚀性能较差,不适用于输送强酸强碱介质和高温介质。

 

二、气动隔膜泵膜片设计要点:
气动隔膜泵膜片密封件设计对泵的性能和寿命有着至关重要的影响。从膜片的厚度、形状、张力等方面进行设计和优化,能够提高隔膜泵的性能和寿命。

1、气动隔膜泵膜片厚度;
膜片的厚度直接影响到膜片的耐用性。一般而言,膜片越厚,耐用性就越好。但是,过于厚的膜片会影响泵的性能和效率,因此需要根据具体的工作条件和介质性质进行选择。

2、气动隔膜泵膜片形状;
膜片的形状也会影响到隔膜泵的性能和寿命。在设计膜片时需要考虑到泵的排量和性能要求,选择合适的形状和尺寸。一般而言,膜片的形状应尽量简单,避免过于复杂的形状和细节,以免影响膜片的强度和耐用性。

3、气动隔膜泵膜片张力;
膜片的张力对隔膜泵的性能和寿命也有着重要的影响。膜片的张力越大,泵的排量越大,但也会影响泵的效率和寿命。在设计和安装膜片时需要注意调整膜片的张力,确保膜片的位置和张力符合要求,避免泄漏和振动。

 

三、气动隔膜泵膜片更换维护:
气动隔膜泵膜片密封件使用寿命是直接影响到隔膜泵的运行时间和工作效率的重要因素之一。因此,在使用隔膜泵时需要定期检查和更换膜片,以确保泵的性能和寿命。

1、气动隔膜泵膜片更换周期;
膜片的更换周期需要根据具体的工作条件和介质性质进行确定。一般而言,膜片的使用寿命在6个月至1年左右。如果发现膜片出现裂纹、老化、变形等问题,需要及时更换膜片。

2、气动隔膜泵膜片更换注意事项——在更换膜片时需要注意以下几点;

(1)选择合适的膜片材料和规格;
(2)检查膜片接口和密封性能;
(3)调整膜片的张力和位置,确保符合要求;
(4)检查泵的其他部件是否存在损坏或磨损;
(5)根据隔膜泵的使用说明书进行操作。

 

总之,气动隔膜泵膜片密封件设计与应用是隔膜泵性能和寿命的关键因素之一。正确选择膜片材料、设计合理的膜片形状和张力、定期检查和更换膜片,能够提高隔膜泵的性能和寿命,保证泵的正常运行。

 

以下英文版:

The design and application of diaphragm seals in pneumatic diaphragm pumps are one of the key factors affecting the performance and lifespan of diaphragm pumps. Qi Sheng Xincai tells you that this article will explore the design and application of diaphragm seals for pneumatic diaphragm pumps from the aspects of material selection, design points, replacement and maintenance.

 

  • Selection of diaphragm material for pneumatic diaphragm pumps:

The diaphragm seals of pneumatic diaphragm pumps are usually made of materials such as rubber, polytetrafluoroethylene, polyester, etc. These materials have certain elasticity and corrosion resistance, and can withstand high pressure and high temperature. Different materials have different properties and applicability, and selection needs to be based on specific working conditions and medium properties.

 

  1. Rubber pneumatic diaphragm pump diaphragm;

Rubber diaphragm is one of the commonly used diaphragm materials for diaphragm pumps, which has good corrosion resistance and wear resistance. It is suitable for transporting medium and low concentration acid and alkali liquids, corrosive media, and food. Commonly used rubber materials include chloroprene rubber, butyl rubber, fluororubber, etc.

 

  1. PTFE pneumatic diaphragm pump diaphragm;

Polytetrafluoroethylene membrane is a material with excellent corrosion resistance, capable of withstanding extreme high temperatures and strong acidic and alkaline media, suitable for transporting highly corrosive and high-temperature media. However, due to its poor elasticity, it is prone to deformation due to stress and is not suitable for conveying media with larger particles. In addition, the price of polytetrafluoroethylene membranes is relatively high and needs to be selected based on specific working conditions and medium properties.

 

  1. Polyester pneumatic diaphragm pump diaphragm;

Polyester film is a material with lower price and higher strength, suitable for conveying medium concentration acid and alkali liquids, food, etc. However, polyester membranes have poor corrosion resistance and are not suitable for transporting strong acid, alkali, and high-temperature media.

 

  • Key points of diaphragm design for pneumatic diaphragm pumps:

The design of diaphragm seals in pneumatic diaphragm pumps has a crucial impact on the performance and lifespan of the pump. Designing and optimizing the thickness, shape, tension, and other aspects of the diaphragm can improve the performance and lifespan of the diaphragm pump.

 

  1. Diaphragm thickness of pneumatic diaphragm pump;

The thickness of the diaphragm directly affects its durability. Generally speaking, the thicker the diaphragm, the better its durability. However, an excessively thick diaphragm can affect the performance and efficiency of the pump, so it needs to be selected based on specific working conditions and medium properties.

 

  1. Diaphragm shape of pneumatic diaphragm pump;

The shape of the diaphragm also affects the performance and lifespan of the diaphragm pump. When designing the diaphragm, it is necessary to consider the displacement and performance requirements of the pump, and choose the appropriate shape and size. Generally speaking, the shape of the membrane should be as simple as possible to avoid overly complex shapes and details, in order to avoid affecting the strength and durability of the membrane.

 

  1. Pneumatic diaphragm pump diaphragm tension;

The tension of the diaphragm also has an important impact on the performance and lifespan of the diaphragm pump. The greater the tension of the diaphragm, the greater the displacement of the pump, but it also affects the efficiency and lifespan of the pump. When designing and installing the diaphragm, attention should be paid to adjusting the tension of the diaphragm to ensure that the position and tension of the diaphragm meet the requirements, and to avoid leakage and vibration.

 

  • Pneumatic diaphragm pump diaphragm replacement and maintenance:

The service life of diaphragm seals in pneumatic diaphragm pumps is one of the important factors that directly affect the operating time and efficiency of diaphragm pumps. Therefore, when using a diaphragm pump, it is necessary to regularly inspect and replace the diaphragm to ensure the performance and lifespan of the pump.

 

  1. Pneumatic diaphragm pump diaphragm replacement cycle;

The replacement cycle of the diaphragm needs to be determined based on specific working conditions and medium properties. Generally speaking, the service life of the diaphragm is around 6 months to 1 year. If cracks, aging, deformation and other issues are found on the membrane, it is necessary to replace the membrane in a timely manner.

 

  1. Precautions for replacing the diaphragm of pneumatic diaphragm pump – The following points need to be noted when replacing the diaphragm;

(1) Select appropriate diaphragm materials and specifications;

(2) Check the membrane interface and sealing performance;

(3) Adjust the tension and position of the diaphragm to ensure compliance with requirements;

(4) Check other components of the pump for damage or wear;

(5) Operate according to the operating manual of the diaphragm pump.

 

In summary, the design and application of diaphragm seals in pneumatic diaphragm pumps are one of the key factors affecting the performance and lifespan of diaphragm pumps. Proper selection of membrane materials, reasonable design of membrane shape and tension, regular inspection and replacement of membranes can improve the performance and lifespan of diaphragm pumps, and ensure their normal operation.

 

 

气动隔膜泵膜片密封件,设计,应用,材料,气动隔膜泵膜片,隔膜泵膜片

液压密封件|车削密封圈|油缸密封件|广东佛山密封件厂家批发定制 – 爱密特密封件公司  https://amtmf.com/

隔膜泵膜片在隔膜泵里的工作原理!

隔膜泵是一种常用的离心泵,其工作原理是利用隔膜将泵腔分成两个密闭的腔室,隔膜的一侧与泵的吸液口相连,另一侧与泵的排液口相连。爱密特密封件告诉您|隔膜泵在实际运行过程中主要包含两大阶段:排出阶段和吸入阶段。当泵的活塞或柱塞移动时,隔膜也随之移动,使得两个腔室的体积发生变化,从而实现液体的吸入和排出。隔膜泵膜片密封件是起到隔离泵腔和输送介质的作用。

隔膜泵膜片密封件的工作原理说明结构图 气动隔膜泵膜片密封件产品图

隔膜泵膜片密封件通常由弹性材料制成,具有一定的弹性和耐腐蚀性能,能够承受高压和高温。膜片的设计和材料选择对隔膜泵的性能和寿命有着重要的影响,因此需要根据具体的工况条件进行选择和优化。隔膜泵中的膜片起着将隔膜泵的轴密封、使液压油和输送浆体拆分开来的作用,使输送浆体只与隔膜腔内部件接触而与动力端密封装置没有发生接触,保障了这些元件的运行寿命。同时,膜片还作为隔膜泵的排放膜与隔膜泵的排量密切相关。

隔膜泵的工作原理与其他离心泵不同,它利用隔膜将泵腔分成两个密闭的腔室,从而使得输送介质与泵的动力部分隔离开来,避免了介质的泄漏和污染。此外,隔膜泵能够在干运转状态下工作,不需要额外的润滑液,因此具有较高的安全性和可靠性。隔膜泵广泛应用于化工、制药、食品、造纸等行业,能够输送各种腐蚀性、高粘度、高温度、高固含量的介质,具有很强的适应性和灵活性。

 

隔膜泵膜片密封件设计和材料选择对隔膜泵的性能和寿命有着重要的影响。隔膜泵膜片密封件通常由橡胶、聚四氟乙烯、聚酯等材料制成,这些材料具有一定的弹性和耐腐蚀性能,能够承受高压和高温。隔膜泵膜片密封件的厚度和形状也会影响泵的性能和寿命,一般而言,膜片厚度越大,耐用性越好,但也会影响泵的性能和效率。因此,在选择隔膜泵膜片时需要综合考虑工作介质的性质、工作条件、泵的性能要求等因素。

 

隔膜泵膜片密封件使用寿命是直接影响到隔膜泵的运行时间和工作效率的重要因素之一。膜片的磨损会导致泵的排量下降、泵的性能变差甚至泵的损坏,因此需要定期检查和更换膜片。在更换膜片时需要注意膜片的安装和调整,确保膜片的位置和张力符合要求,避免泄漏和振动。

 

总之,隔膜泵膜片密封件是其关键部件之一,起着隔离泵腔和输送介质、隔离动力部分和输送介质、调节泵的排量和性能等作用。在选择膜片材料和设计时需要综合考虑工作介质的性质、工作条件、泵的性能要求等因素,定期检查和更换膜片能够保证隔膜泵的正常运行和工作效率。

 

 

以下英文版:

Diaphragm pumps are a type of centrifugal pump that works by using a diaphragm to divide the pump chamber into two sealed chambers. One side of the diaphragm is connected to the pump’s suction port, while the other side is connected to the discharge port. The diaphragm pump mainly includes two stages during operation: the discharge stage and the suction stage. When the piston or plunger of the pump moves, the diaphragm also moves, causing a change in the volume of the two chambers, thus allowing for the suction and discharge of liquids. The diaphragm pump diaphragm sealing element isolates the pump chamber from the conveyed medium.

 

Diaphragm pump diaphragm sealing elements are usually made of elastic materials with certain elasticity and corrosion resistance, which can withstand high pressure and high temperature. The design and material selection of the diaphragm have an important influence on the performance and life of the diaphragm pump. Therefore, it is necessary to select and optimize according to specific working conditions. The diaphragm in the diaphragm pump serves as a shaft seal and separates the hydraulic oil and conveyed slurry, ensuring that the conveyed slurry only contacts the internal components of the diaphragm chamber and not the sealing device of the power end, thereby ensuring the service life of these components. At the same time, the diaphragm also acts as the discharge diaphragm of the diaphragm pump, which is closely related to the pump’s discharge.

 

The working principle of the diaphragm pump is different from other centrifugal pumps. It uses a diaphragm to divide the pump chamber into two sealed chambers, which isolates the conveyed medium from the power part of the pump, avoiding medium leakage and pollution. In addition, the diaphragm pump can work in a dry-running state without additional lubricants, so it has high safety and reliability. The diaphragm pump is widely used in industries such as chemical, pharmaceutical, food, and papermaking, and can transport various corrosive, high viscosity, high temperature, and high solid content media, exhibiting strong adaptability and flexibility.

 

The design and material selection of diaphragm pump diaphragm sealing elements have an important influence on the performance and life of the diaphragm pump. Diaphragm pump diaphragm sealing elements are usually made of materials such as rubber, polytetrafluoroethylene, and polyester, which have certain elasticity and corrosion resistance and can withstand high pressure and high temperature. The thickness and shape of the diaphragm also affect the performance and life of the pump. Generally, the thicker the diaphragm, the more durable it is, but it will also affect the pump’s performance and efficiency. Therefore, when selecting diaphragm pump diaphragms, it is necessary to consider factors such as the properties of the working medium, working conditions, and pump performance requirements comprehensively.

 

The service life of the diaphragm pump diaphragm sealing element is one of the important factors directly affecting the operating time and working efficiency of the diaphragm pump. Diaphragm wear can cause a decrease in pump displacement, deterioration of pump performance, and even pump damage, so it is necessary to inspect and replace the diaphragm regularly. When replacing the diaphragm, attention should be paid to the installation and adjustment of the diaphragm to ensure that the diaphragm’s position and tension meet the requirements and to avoid leakage and vibration.

 

In summary, the diaphragm pump diaphragm sealing element is one of its key components, playing a role in isolating the pump chamber and conveyed medium, isolating the power part and conveyed medium, regulating the pump’s discharge and performance, etc. When selecting diaphragm materials and designs, it is necessary to consider factors such as the properties of the working medium, working conditions, and pump performance requirements comprehensively. Regular inspection and replacement of the diaphragm can ensure the normal operation and working efficiency of the diaphragm pump.

 

 

隔膜泵膜片,隔膜泵,工作原理,膜片,密封件

液压密封件|车削密封圈|油缸密封件|广东佛山密封件厂家批发定制 – 爱密特密封件公司  https://amtmf.com/

氟塑料密封件:耐腐蚀、高温、绝缘的多用途高分子材料

氟塑料制品密封件四氟产品图

氟塑料是一种具有优异性能的高分子材料,爱密特密封件告诉您具有优异的耐腐蚀性、耐高温性、耐磨性和绝缘性,广泛应用于化工、电子、医疗、航空航天等领域。本文将重点介绍氟塑料制品密封件的制造和应用。

 

一、氟塑料的种类和特性:

氟塑料主要包括聚四氟乙烯(PTFE)、氟化乙烯-三氟氯乙烯共聚物(FEP)、氟化乙烯-六氟丙烯共聚物(PFA)和聚偏氟乙烯(PVDF)等。它们的主要特性如下:

1、PTFE具有优异的耐腐蚀性、耐高温性、耐磨性和绝缘性,是一种重要的高分子材料。。。

2、FEP具有优异的透明性、低粘度和高拉伸强度,广泛应用于电线电缆、管道和阀门等制品中。

3、PFA具有优异的化学稳定性、高温耐性和耐腐蚀性,是一种理想的高分子材料。

4、PVDF具有优异的耐腐蚀性、耐高温性和耐紫外线性能,广泛应用于化工、电子和医疗领域。

 

二、氟塑料制品密封件的制造:

氟塑料制品密封件的制造主要分为挤出成型、注塑成型、压延成型和热成型等。其中,挤出成型是最常用的制造方法,具体步骤如下:

1、原料处理:将氟塑料颗粒加入到挤出机的料斗中,并加入必要的添加剂和颜料。

2、挤出:将加热后的氟塑料通过挤出机压缩,经过模头挤出成型,形成所需形状的塑料制品。

3、成型:通过冷却和切割等工艺,将挤出的氟塑料制品密封件成型。

 

三、氟塑料制品密封件的应用:

氟塑料制品密封件广泛应用于化工、电子、医疗、航空航天等领域,主要包括管道、阀门、泵、储罐、仪表和电线电缆等制品。以下是氟塑料制品密封件的主要应用领域:

1、化工领域:氟塑料制品密封件具有优异的耐腐蚀性和耐高温性能,广泛应用于管道、阀门、泵和储罐等制品中。

2、电子领域:氟塑料制品密封件具有优异的绝缘性能和耐高温性能,广泛应用于电线电缆、电子元件和半导体制品等中。

3、医疗领域:氟塑料制品密封件具有优异的生物相容性和耐化学性能,广泛应用于医疗器械和药品包装等制品中。

4、航空航天领域:氟塑料制品密封件具有优异的耐高温性能和防火性能,广泛应用于航空航天器和导弹制品等中。

 

结论

氟塑料制品密封件是一种具有优异性能的高分子材料,具有广泛的应用前景。随着科技的不断进步和应用领域的不断扩大,氟塑料制品密封件的市场需求将会不断增长。

 

以下英文版Translate to English.:

Fluoroplastics are high-performance polymer materials with excellent corrosion resistance, high temperature resistance, wear resistance, and insulation properties. They are widely used in fields such as chemical industry, electronics, medical care, aerospace, etc. This article will focus on the manufacturing and application of fluoroplastic products.

 

  1. Types and Characteristics of Fluoroplastics

Fluoroplastics mainly include polytetrafluoroethylene (PTFE), fluorinated ethylene-propylene copolymer (FEP), perfluoroalkoxy copolymer (PFA), and polyvinylidene fluoride (PVDF). Their main characteristics are as follows:

  • PTFE has excellent corrosion resistance, high temperature resistance, wear resistance, and insulation properties, making it an important polymer material.
  • FEP has excellent transparency, low viscosity, and high tensile strength, and is widely used in products such as wires and cables, pipes, and valves.
  • PFA has excellent chemical stability, high temperature resistance, and corrosion resistance, making it an ideal polymer material.
  • PVDF has excellent corrosion resistance, high temperature resistance, and UV resistance, and is widely used in the fields of chemical industry, electronics, and medical care.

 

  1. Manufacturing of Fluoroplastic Products

The manufacturing of fluoroplastic products mainly includes extrusion molding, injection molding, calendaring, and thermoforming. Among them, extrusion molding is the most commonly used manufacturing method, and the specific steps are as follows:

  • Raw material processing: Add fluoroplastic pellets to the hopper of the extruder and add necessary additives and pigments.
  • Extrusion: Compress the heated fluoroplastic through the extruder and extrude it through the die to form the required shape of the plastic product.
  • Molding: The extruded fluoroplastic product is formed through processes such as cooling and cutting.

 

III. Application of Fluoroplastic Products

Fluoroplastic products are widely used in fields such as chemical industry, electronics, medical care, and aerospace, mainly including products such as pipes, valves, pumps, storage tanks, instruments, and wires and cables. The main application areas of fluoroplastic products are as follows:

  • Chemical industry: Fluoroplastic products have excellent corrosion resistance and high temperature resistance, and are widely used in products such as pipes, valves, pumps, and storage tanks.
  • Electronics: Fluoroplastic products have excellent insulation and high temperature resistance properties, and are widely used in products such as wires and cables, electronic components, and semiconductor products.
  • Medical care: Fluoroplastic products have excellent biocompatibility and chemical resistance properties, and are widely used in products such as medical devices and drug packaging.
  • Aerospace: Fluoroplastic products have excellent high temperature resistance and flame retardancy properties, and are widely used in products such as aerospace vehicles and missile products.

 

计量泵膜片密封件,计量泵膜片,膜片密封件,选购,性能

液压密封件|车削密封圈|油缸密封件|广东佛山密封件厂家批发定制 – 爱密特密封件公司  https://amtmf.com/

计量泵膜片密封件对性能的影响及选购建议

这是一个飞速发展的时代,计量泵作为现代工业生产中不可或缺的重要设备,爱密特密封件告诉您其应用范围越来越广泛,性能也越来越完善。而在计量泵的运转中,膜片密封件则是其关键组成部分,它的质量和性能直接影响计量泵的稳定性和精度。

计量泵膜片密封件规格产品图

在各行各业中,计量泵的膜片密封件都扮演着重要的角色。它们需要具备良好的耐腐蚀性能和优异的密封性能,以确保计量泵的正常运转和使用寿命。

 

而选购适合的计量泵膜片密封件则是确保计量泵稳定性和精度的关键因素。以下是选购计量泵膜片密封件的指南:

1.了解计量泵的型号和规格:不同型号和规格的计量泵需要不同的膜片密封件。因此,在选购膜片密封件时,一定要清楚自己的计量泵型号和规格,以确保选购的膜片密封件与计量泵匹配。

2.选择适合的材质和密封性能:常见的材质有氟橡胶、丁基橡胶等,密封性能则需要根据具体使用场景来选择。在选购膜片密封件时,一定要根据实际使用场景选择适合的材质和密封性能,以确保其具有良好的耐腐蚀性能和密封性能。

3.注意品牌和质量:选购具有知名品牌和高质量的膜片密封件,可以避免使用过程中出现故障,保证计量泵的正常运转。因此,在选购膜片密封件时,一定要选择知名品牌和高质量的产品。

 

在工业生产中,计量泵膜片密封件的重要性不言而喻。只有选择适合的膜片密封件,才能确保计量泵的正常运转和使用寿命,提高工业生产效率,为工业生产的发展注入强劲的动力。

 

以下英文版Translate to English.:

In this era of rapid development, metering pumps have become an indispensable and important equipment in modern industrial production. The application range of metering pumps is becoming increasingly wide, and their performance is also becoming more and more advanced. In the operation of metering pumps, the diaphragm seal is a key component, and its quality and performance directly affect the stability and accuracy of the metering pump.

 

In various industries, the diaphragm seal of the metering pump plays an important role. They need to have good corrosion resistance and excellent sealing performance to ensure the normal operation and service life of the metering pump.

 

Choosing the appropriate diaphragm seal for the metering pump is the key factor in ensuring its stability and accuracy. Here are some guidelines for selecting diaphragm seals for metering pumps:

 

  • Understand the model and specifications of the metering pump: Different models and specifications of metering pumps require different diaphragm seals. Therefore, when selecting diaphragm seals, it is important to be clear about the model and specifications of your metering pump to ensure that the selected diaphragm seal is compatible with the pump.
  • Choose the appropriate material and sealing performance: Common materials include fluoro rubber, nitrile rubber, etc., and the sealing performance needs to be selected based on the specific usage scenario. When selecting diaphragm seals, it is important to choose the appropriate material and sealing performance based on the actual usage scenario to ensure good corrosion resistance and sealing performance.
  • Pay attention to brand and quality: Choosing diaphragm seals with well-known brands and high quality can avoid failures during use and ensure the normal operation of the metering pump. Therefore, when selecting diaphragm seals, it is important to choose reputable brands and high-quality products.

 

The importance of diaphragm seals for metering pumps in industrial production is self-evident. Only by choosing appropriate diaphragm seals can the normal operation and service life of the metering pump be ensured, and the efficiency of industrial production can be improved, injecting strong power into the development of industrial production.

计量泵膜片密封件,计量泵膜片,膜片密封件,选购,性能

液压密封件|车削密封圈|油缸密封件|广东佛山密封件厂家批发定制 – 爱密特密封件公司  https://amtmf.com/